OH8625 with backup

‌‌

Steel switchboards with IP66 protection
Suitable for outdoor switch installation
Tested according to EN 61439-1
Free space for backup battery
Dimensions: 800x600x250 mm

The OH8625 series outdoor steel switchgear is sized and equipped for outdoor installation of 2G and 20G series industrial switches. Models are available with a backup power supply and a shelf for battery installation. With a height of 80 cm and a width of 60 cm, there is plenty of room for additional equipment in the cabinet. A wiring diagram and unit test report are included.

Models

OH8625-C10.A12.R.PB7.SE

Outdoor steel switchboard with space for a backup battery. The switchboard complies with EN 61439-1 (certified by TUV SUD) and is optimized especially for outdoor installations of METEL industrial switches, PLCs and IO modules. The switchboard can also be fitted with devices from other manufacturers. The switchboard is equipped with the following components: socket 230VAC type E (CZ), backup power supply 48VDC/240W, surge protector 1st + 2nd stage, circuit breaker 10A, current protector, dimensions.

Order code: 6-211-210

Availability: Full-scale production

OH8625-C10.A12.R.PB7.SF

Outdoor steel switchboard with space for a backup battery. The switchboard is in accordance with EN 61439-1 (certified by TUV SUD) and is optimized especially for outdoor installations of industrial switches, PLCs and METEL IO modules. The switchboard can also be equipped with devices of other manufacturers. The switchboard is equipped with the following components: socket 230VAC type F (DE), backup power supply 48VDC/240W, surge protector 1st + 2nd stage, circuit breaker 10A, current protector, dimensions: 800x600x250 mm

Order code: 6-211-220

Availability: Full-scale production

Specifications

OH8625 with backup

Short catalog Sheet (PDF) EU declaration of conformity (PDF)

Technical parameters

MECHANICS
Dimensions - h / w / d	800 x 600 x 250 mm
Pins	14 (PG11)
Material	Galvanized steel
Surface treatment	Epoxy-polyester (grey RAL 7035)
Weight	Max. 40 kg (without batteries)
Shelf for batteries	2x, dimensions: 180x190 mm
Pressure relief valve	1
Tamper	NC, max. 24 V / 100 mA
Mechanical protection	IK10
Degree of coverage	IP66 / IP55 (with thermoset)

ENVIRONMENT
Operating temperature	-40...+70 °C
Storage temperature	-40...+70 °C
Humidity	Max. 95 %

JISTIČ
Rated working voltage	230 VAC
Rated current	10 A
Tripping characteristic	C
Rated short-circuit capability	6 kA

SURGE PROTECTION
Type	T1, T2, T3
Rated operating voltage	230 VAC
Voltage protection level at the In input	1,25 kV
Pulse discharge current for Class I test (10/350)	12.5 kA

CURRENT PROTECTOR
Rated working voltage	230 VAC
Type	A
Rated residual current	30 mA
Rated short-circuit capability	6 kA

BACKUP POWER SUPPLY (AND ACCESSORIES)
Input voltage (50 Hz)	115 - 230 - 277 VAC (90 - 135 VAC / 180 - 305 VAC)
Rated power	240 W
Output voltage (Vn) / rated current (In)	48 VDC / 5A (switch-on delay max. 1.5 s)
Short circuit / overload / overheating protection	Yes (support for capacity load startup)
Output for batteries	4pcs of series connected 12 V batteries
Supported batteries	Lead acids, AGM, GEL
Relay 1 (C-NC-NO) \| Relay max. 30 VDC / 1 A	Main or backup input power supply
Relay 2 (C-NC-NO) \| Relay max. 30 VDC / 1 A	Malfunctioning system / weak battery
Battery Output Protection	Two-pole fuse holder with 6A gG fuses
Output protection 48 VDC	Circuit breaker

SOCKET 230 VAC
Rated working voltage	230 VAC
Type E	With protective pin
Type F	Schuko design

Standards and protocols, EMC and safety

EMC and safety
EN 61000-6-2		Immunity - industrial environment
EN 55022		EMC - Emissions requirements
IEEE 1613		Environmental and Testing Requirements \| Electric Power Substations
EN 61439-1		Low voltage switchboards
EN IEC 63000		The Assessment Of Electrical And Electronic Products With Respect To The ROHS