CLI
USER MODE
USER
Children mode(s): PRIVILEGED
| Command | Description |
|---|---|
| enable | After password authentication enable privileged mode → PRIVILEGED |
| help | Access to the help |
| logout | Log out of the system |
PRIVILEGED MODE
USER → PRIVILEGED
Parent mode: USER | Children mode(s): CONFIGURATION
| Command | Description |
|---|---|
| boot ▾ | Set system boot parameters |
| boot factory-reset | Do factory reset |
| boot upgrade | Upgrade boot image |
| clock ▾ | Set current system time and date |
| clock date | Set current system date (YYYY-MM-DD) |
| clock time | Set current system time (hh:mm:ss) |
| configure | Switch to configuration commands → CONFIGURATION |
| copy ▾ | Copy data from one file to another |
| copy nvm | Copy from NVM (non-volatile memory) |
| copy ram | Copy from RAM (volatile memory) |
| copy running-config ▾ | Copy running-config |
| copy running-config boot-config | Copy running-config to boot-config |
| copy running-config nvm | Copy running-config to NVM (non-volatile memory) |
| copy running-config ram | Copy running-config to RAM (volatile memory) |
| copy running-config sftp | Copy running config to SFTP server |
| copy running-config tftp | Copy running config to TFTP server |
| copy sftp | Copy from SFTP |
| copy tftp | Copy from TFTP |
| dir ▾ | List files from local storage |
| dir nvm | List files from NVM (non-volatile memory) |
| dir ram | List files from RAM (volatile memory) |
| disable | Disable privileged commands → USER |
| exit | Return to the previous level → USER |
| export-help | View help of all commands |
| help | Access to the help |
| ping | Send ICMP echo request to network host (IP address or hostname) |
| traceroute | Trace route to network host (IP address or hostname) |
| reboot ▾ | Perform a restart of the device |
| reboot now | Reboot immediately |
| reboot timeout | Schedule or cancel reboot |
| repeat | Repeat a command from history |
| rmfile ▾ | Remove a file |
| rmfile nvm | Remove a file from NVM (non-volatile memory) |
| rmfile ram | Remove a file from RAM (volatile memory) |
| view ▾ | View information about the running system |
| view bootvar | View boot information |
| view boot-config | View boot configuration |
| view clock | View current system time and date |
| view diff | Compare boot configuration with running configuration |
| view history | View command history |
| view dot1x ▾ | View DOT1X settings (also accepts subcommands) |
| view dot1x authenticator ▾ | View Authenticator status |
| view dot1x authenticator state | View authenticator state |
| view dot1x authenticator statistics ▾ | View authenticator statistics |
| view dot1x authenticator statistics FramesRx | View column Frames Rx |
| view dot1x authenticator statistics FramesTx | View column Frames Tx |
| view dot1x authenticator statistics StartFramesRx | View column Start Frames Rx |
| view dot1x authenticator statistics LogoffFramesRx | View column Logoff Frames Rx |
| view dot1x authenticator statistics RespIdFramesRx | View column Resp IdFrames Rx |
| view dot1x authenticator statistics RespFramesRx | View column Resp Frames Rx |
| view dot1x authenticator statistics ReqIdFramesTx | View column ReqId Frames Tx |
| view dot1x authenticator statistics ReqFramesTx | View column Req Frames Tx |
| view dot1x authenticator statistics InvalidFramesRx | View column Invalid Frames Rx |
| view dot1x authenticator statistics LengthErrorFramesRx | View column Length Error Frames Rx |
| view dot1x authenticator statistics LastFrameVersion | View column Last Frame Version |
| view dot1x authenticator statistics LastFrameSource | View column Last Frame Source |
| view dot1x authenticator diagnostics ▾ | View authenticator diagnostics |
| view dot1x authenticator diagnostics EntersConn | View column Enters connecting |
| view dot1x authenticator diagnostics LogoffsWhileConn | View column Logoffs while connecting |
| view dot1x authenticator diagnostics EntersAuth | View column Enters authenticating |
| view dot1x authenticator diagnostics SuccessWhileAuth | View column Success while authenticating |
| view dot1x authenticator diagnostics TimeoutsWhileAuth | View column Timeouts while authenticating |
| view dot1x authenticator diagnostics FailWhileAuth | View column Fail while authenticating |
| view dot1x authenticator diagnostics ReauthsWhileAuthing | View column Reauths while authenticating |
| view dot1x authenticator diagnostics StartsWhileAuthing | View column Starts while authenticating |
| view dot1x authenticator diagnostics LogoffWhileAuthing | View column Logoff while authenticating |
| view dot1x authenticator diagnostics ReauthsWhileAuthed | View column Reauths while authenticated |
| view dot1x authenticator diagnostics StartsWhileAuthed | View column Starts while authenticated |
| view dot1x authenticator diagnostics LogoffWhileAuthed | View column Logoff while authenticated |
| view dot1x authenticator diagnostics BackendResponses | View column Backend responses |
| view dot1x authenticator diagnostics AccessChallenges | View column Access challenges |
| view dot1x authenticator diagnostics OtherRequests | View column Other Requests to supplicant |
| view dot1x authenticator diagnostics NonNakResponses | View column NonNak Responses from supplicant |
| view dot1x authenticator diagnostics AuthSuccesses | View column Auth Successes |
| view dot1x authenticator diagnostics AuthFails | View column Auth Fails |
| view dot1x authenticator session | View authenticator session |
| view dot1x authenticator port | View authenticator port |
| view dot1x supplicant ▾ | View Supplicant status |
| view dot1x supplicant state | View supplicant state |
| view dot1x supplicant statistics ▾ | View supplicant statistics |
| view dot1x supplicant statistics FramesRx | View column Frames Rx |
| view dot1x supplicant statistics FramesTx | View column Frames Tx |
| view dot1x supplicant statistics StartFramesTx | View column Start Frames Tx |
| view dot1x supplicant statistics LogoffFramesTx | View column Logoff Frames Tx |
| view dot1x supplicant statistics RespIdFramesTx | View column Resp IdFrames Tx |
| view dot1x supplicant statistics RespFramesTx | View column Resp Frames Tx |
| view dot1x supplicant statistics ReqIdFramesRx | View column ReqId Frames Rx |
| view dot1x supplicant statistics ReqFramesRx | View column Req Frames Rx |
| view dot1x supplicant statistics InvalidFramesRx | View column Invalid Frames Rx |
| view dot1x supplicant statistics LengthErrorFramesRx | View column Length Error Frames Rx |
| view dot1x supplicant statistics LastFrameVersion | View column Last Frame Version |
| view dot1x supplicant statistics LastFrameSource | View column Last Frame Source |
| view dot1x supplicant port | View supplicant port |
| view ports ▾ | View information about ports |
| view ports alias | View alias (description) of ports |
| view ports errorCounters | View error counters for ports |
| view ports summary | View summary of ports |
| view ports stats | View statistics for ports |
| view ports status | View status of all device ports |
| view input | View digital inputs |
| view ip | View information about network settings |
| view log ▾ | View log contents |
| view log count ▾ | Count all events (also accepts subcommands) |
| view log count emergency | Count only emergency severity |
| view log count alert | Count only alert severity |
| view log count critical | Count only critical severity |
| view log count error | Count only error severity |
| view log count warning | Count only warning severity |
| view log count notice | Count only notice severity |
| view log count info | Count only info severity |
| view log count debug | Count only debug severity |
| view log list ▾ | List all events (also accepts subcommands) |
| view log list emergency | List only emergency severity |
| view log list alert | List only alert severity |
| view log list critical | List only critical severity |
| view log list error | List only error severity |
| view log list warning | List only warning severity |
| view log list notice | List only notice severity |
| view log list info | List only info severity |
| view log list debug | List only debug severity |
| view radius ▾ | View RADIUS configuration (also accepts subcommands) |
| view radius server1 | View RADIUS server 1 settings |
| view radius server2 | View RADIUS server 2 settings |
| view reboot-timeout | View reboot timeout remaining seconds |
| view running-config ▾ | View current (running) configuration (also accepts subcommands) |
| view running-config full | View current (running) configuration with all defaults |
| view syslog | View SYSLOG |
| view system | View basic system information |
| view tacacs | View TACACS configuration |
| view topology | View selected topology protocol |
| view version | View hardware and firmware details |
| view vlan | View VLAN configuration and status |
| view lacp ▾ | View LACP settings |
| view lacp parameters ▾ | LACP parameters |
| view lacp parameters lag | LACP LAG parameters |
| view lacp parameters port | LACP port parameters |
| view lacp summary ▾ | LACP summary information (also accepts subcommands) |
| view lacp summary lag | LACP LAG summary information |
| view lacp verbose ▾ | LACP verbose information (also accepts subcommands) |
| view lacp verbose lag | LACP LAG verbose information |
CONFIGURATION MODE
USER → PRIVILEGED → CONFIGURATION
| Command | Description |
|---|---|
| description | Set system description |
| do | Do command from privileged mode (commands from privileged) |
| dot1x ▾ | Configure IEEE 802.1X |
| dot1x disable | Disable NAS service |
| dot1x enable | Enable NAS service |
| enable-password ▾ | Set enable password |
| enable-password hash | Set enable password as HASH |
| enable-password sha-512 | Set enable password as SHA-512 |
| enable-password none | Remove enable password |
| end | Return to the previous level → PRIVILEGED |
| exit | Return to the previous level → PRIVILEGED |
| hostname | Set hostname |
| port | Set port → PORT |
| ring | Set METEL LAN-RING protocol → RING |
| line ▾ | Configure line (USB/SSH) settings → LINE |
| line usb | USB interface |
| line ssh | SSH interface |
| snmp ▾ | Configure SNMP settings |
| snmp version ▾ | Configure SNMP version |
| snmp version v2c | Set SNMP to version 2c |
| snmp version v3 | Set SNMP to version 3 |
| snmp trap ▾ | Configure SNMP trap |
| snmp trap conf-changed ▾ | Configuration changed TRAP settings |
| snmp trap conf-changed changed-disable | Disable configuration changed |
| snmp trap conf-changed changed-enable | Enable configuration changed |
| snmp trap live-check ▾ | Live check TRAP settings |
| snmp trap live-check disable | Disable trap destination |
| snmp trap live-check enable | Enable trap destination |
| snmp trap live-check timeout | Set timeout [s] |
| snmp trap live-check syslog-disable | Disable write to logger |
| snmp trap live-check syslog-enable | Enable write to logger |
| snmp trap temperature ▾ | Temperature monitoring SNMP trap configuration |
| snmp trap temperature limit | Set limit [C] |
| snmp trap temperature over-limit-disable | Disable SNMP trap when temperature exceeds upper limit |
| snmp trap temperature over-limit-enable | Enable SNMP trap when temperature exceeds upper limit |
| snmp trap temperature under-limit-disable | Disable SNMP trap when temperature drops below lower limit |
| snmp trap temperature under-limit-enable | Enable SNMP trap when temperature drops below lower limit |
| snmp trap voltage ▾ | Voltage monitoring SNMP trap configuration |
| snmp trap voltage backup ▾ | Configure backup voltage traps |
| snmp trap voltage backup ov-limit | Set overvoltage limit [V] |
| snmp trap voltage backup ov-over-disable | Disable overvoltage limit |
| snmp trap voltage backup ov-over-enable | Enable overvoltage limit |
| snmp trap voltage backup ov-under-disable | Disable overvoltage limit |
| snmp trap voltage backup ov-under-enable | Enable overvoltage limit |
| snmp trap voltage backup uv-limit | Set undervoltage limit [V] |
| snmp trap voltage backup uv-over-disable | Disable undervoltage over limit |
| snmp trap voltage backup uv-over-enable | Enable undervoltage over limit |
| snmp trap voltage backup uv-under-disable | Disable undervoltage under limit |
| snmp trap voltage backup uv-under-enable | Enable undervoltage under limit |
| snmp trap voltage primary ▾ | Configure primary voltage traps |
| snmp trap voltage primary ov-limit | Set overvoltage limit [V] |
| snmp trap voltage primary ov-over-disable | Disable overvoltage limit |
| snmp trap voltage primary ov-over-enable | Enable overvoltage limit |
| snmp trap voltage primary ov-under-disable | Disable overvoltage limit |
| snmp trap voltage primary ov-under-enable | Enable overvoltage limit |
| snmp trap voltage primary uv-limit | Set undervoltage limit [V] |
| snmp trap voltage primary uv-over-disable | Disable undervoltage over limit |
| snmp trap voltage primary uv-over-enable | Enable undervoltage over limit |
| snmp trap voltage primary uv-under-disable | Disable undervoltage under limit |
| snmp trap voltage primary uv-under-enable | Enable undervoltage under limit |
| snmp dest-trap ▾ | Configure SNMP trap destinations |
| snmp dest-trap host1 ▾ | TRAP destination host 1 settings |
| snmp dest-trap host1 disable | Disable trap destination |
| snmp dest-trap host1 enable | Enable trap destination |
| snmp dest-trap host1 ip | Set IPv4 for destination |
| snmp dest-trap host1 port | Set port for destination |
| snmp dest-trap host1 name | Set SNMP community or username |
| snmp dest-trap host2 ▾ | TRAP destination host 2 settings |
| snmp dest-trap host2 disable | Disable trap destination |
| snmp dest-trap host2 enable | Enable trap destination |
| snmp dest-trap host2 ip | Set IPv4 for destination |
| snmp dest-trap host2 port | Set port for destination |
| snmp dest-trap host2 name | Set SNMP community or username |
| snmp dest-trap host3 ▾ | TRAP destination host 3 settings |
| snmp dest-trap host3 disable | Disable trap destination |
| snmp dest-trap host3 enable | Enable trap destination |
| snmp dest-trap host3 ip | Set IPv4 for destination |
| snmp dest-trap host3 port | Set port for destination |
| snmp dest-trap host3 name | Set SNMP community or username |
| snmp dest-trap host4 ▾ | TRAP destination host 4 settings |
| snmp dest-trap host4 disable | Disable trap destination |
| snmp dest-trap host4 enable | Enable trap destination |
| snmp dest-trap host4 ip | Set IPv4 for destination |
| snmp dest-trap host4 port | Set port for destination |
| snmp dest-trap host4 name | Set SNMP community or username |
| snmp dest-trap host5 ▾ | TRAP destination host 5 settings |
| snmp dest-trap host5 disable | Disable trap destination |
| snmp dest-trap host5 enable | Enable trap destination |
| snmp dest-trap host5 ip | Set IPv4 for destination |
| snmp dest-trap host5 port | Set port for destination |
| snmp dest-trap host5 name | Set SNMP community or username |
| sntp ▾ | Configure SNTP |
| sntp disable | Disable SNTP |
| sntp enable | Enable SNTP |
| sntp server1 | Configure primary SNTP server IP address |
| sntp server2 | Configure secondary SNTP server IP address |
| sntp server3 | Configure tertiary SNTP server IP address |
| sntp request-interval | Server request interval in seconds |
| sntp timezone | Timezone offset in hours |
| sntp auto-DST-disable | Disable automatic daylight saving time correction |
| sntp auto-DST-enable | Enable automatic daylight saving time correction |
| sntp synchronize | Try to synchronize with SNTP servers |
| sntp set-time | Set time in format dd.mm.yyyy hh:mm:ss |
| igmp ▾ | Configure IGMP |
| igmp snooping-disable | Disable IGMP snooping |
| igmp snooping-enable | Enable IGMP snooping |
| input | Configure input signal settings → INPUT |
| ip ▾ | Configure IP protocol settings |
| ip addr-mask | Set IP address and mask in slash format <IP>/<MASKNUMBER> |
| ip addr | Set IP address |
| ip dns | Specify DNS |
| ip gate | Configure IP gateway |
| ip mask | Configure IP mask |
| ip icmp-echo-disable | Disable ICMP echo |
| ip icmp-echo-enable | Enable ICMP echo |
| ip vlan-disable | Disable VLAN tagging for IP |
| ip vlan-enable | Enable VLAN tagging for IP |
| ip vlan-id | Specify VLAN ID |
| ip vlan-pri | Specify VLAN priority |
| mirror ▾ | Data src and dst port mirroring settings |
| mirror ingress-dst | Set the destination port for ingress mirrored data |
| mirror no-ingress-dst | Disables destination port for ingress mirrored data |
| mirror egress-dst | Set the destination port for egress mirrored data |
| mirror no-egress-dst | Disables destination port for egress mirrored data |
| mirror cpu-ingress-src | Selects CPU port ingress data as mirroring source |
| mirror no-cpu-ingress-src | Selects CPU port egress data as mirroring source |
| mirror cpu-egress-src | Disables CPU port ingress data as mirroring source |
| mirror no-cpu-egress-src | Disables CPU port egress data as mirroring source |
| radius ▾ | Configure RADIUS |
| radius server1 ▾ | RADIUS server 1 settings |
| radius server1 disable | Disable server |
| radius server1 enable | Enable server |
| radius server1 host | Set host for server |
| radius server1 key ▾ | Set communication encryption key |
| radius server1 key code | Set communication encryption key as CODE |
| radius server1 key base32 | Set communication encryption key as Base32 |
| radius server1 key none | Remove communication encryption key |
| radius server1 timeout | Set communication timeout in seconds |
| radius server2 ▾ | RADIUS server 2 settings |
| radius server2 disable | Disable server |
| radius server2 enable | Enable server |
| radius server2 host | Set host for server |
| radius server2 key ▾ | Set communication encryption key |
| radius server2 key code | Set communication encryption key as CODE |
| radius server2 key base32 | Set communication encryption key as Base32 |
| radius server2 key none | Remove communication encryption key |
| radius server2 timeout | Set communication timeout in seconds |
| syslog ▾ | Configure SYSLOG |
| syslog server1 ▾ | SYSLOG server 1 settings |
| syslog server1 disable | Disable server |
| syslog server1 enable | Enable server |
| syslog server1 host | Set host for server |
| syslog server2 ▾ | SYSLOG server 2 settings |
| syslog server2 disable | Disable server |
| syslog server2 enable | Enable server |
| syslog server2 host | Set host for server |
| tacacs ▾ | Configure TACACS+ |
| tacacs server1 ▾ | TACACS+ server 1 settings |
| tacacs server1 disable | Disable server |
| tacacs server1 enable | Enable server |
| tacacs server1 host | Set host for server |
| tacacs server1 key ▾ | Set communication encryption key |
| tacacs server1 key code | Set communication encryption key as CODE |
| tacacs server1 key base32 | Set communication encryption key as Base32 |
| tacacs server1 key none | Remove communication encryption key |
| tacacs server1 timeout | Set communication timeout in seconds |
| tacacs server2 ▾ | TACACS+ server 2 settings |
| tacacs server2 disable | Disable server |
| tacacs server2 enable | Enable server |
| tacacs server2 host | Set host for server |
| tacacs server2 key ▾ | Set communication encryption key |
| tacacs server2 key code | Set communication encryption key as CODE |
| tacacs server2 key base32 | Set communication encryption key as Base32 |
| tacacs server2 key none | Remove communication encryption key |
| tacacs server2 timeout | Set communication timeout in seconds |
| topology ▾ | Configure topology protocol |
| topology mode ▾ | Set topology protocol |
| topology mode none | No topology protocol |
| topology mode lan-ring | Enable LAN-RING mode |
| topology mode rstp-m | Enable RSTP-M mode |
| topology rstp-m ▾ | Configure RSTP-M mode |
| topology rstp-m priority | Set RSTP-M priority |
| topology rstp-m hello-time | Set RSTP-M hello time |
| topology rstp-m max-age | Set RSTP-M max age |
| topology rstp-m forward-delay | Set RSTP-M forward delay |
| user-add | Add or modify a user. Use: user-add USERNAME sha-512 PASSWORD |
| user-del | Delete/Remove the user by USERNAME |
| user-erase-all | (IMPORT) Remove all users including the metel user |
| vlan | VLAN-specific commands → VLAN |
| vlan-init-tab | Initialize VLAN tables |
| lag | Configure LAG → LAG |
| import ▾ | Import configuration from file |
| import nvm | Import configuration from NVM |
| import ram | Import configuration from RAM |
PORT MODE
Parent mode: CONFIGURATION
| Command | Description |
|---|---|
| adv-10-full-disable | Disable AN 10Mbps full-duplex |
| adv-10-full-enable | Enable AN 10Mbps full-duplex |
| adv-10-half-disable | Disable AN 10Mbps half-duplex |
| adv-10-half-enable | Enable AN 10Mbps half-duplex |
| adv-100-full-disable | Disable AN 100Mbps full-duplex |
| adv-100-full-enable | Enable AN 100Mbps full-duplex |
| adv-100-half-disable | Disable AN 100Mbps half-duplex |
| adv-100-half-enable | Enable AN 100Mbps half-duplex |
| adv-1000-full-disable | Disable AN 1000Mbps full-duplex |
| adv-1000-full-enable | Enable AN 1000Mbps full-duplex |
| alias | Set port alias (description) |
| an-enable | Enable AN |
| an-disable | Disable AN |
| atu-disable-learning | Disable address table learning |
| atu-disable-using-da | Disable usage of destination address in ATU |
| atu-egress-mode ▾ | Set ATU egress filtering mode |
| atu-egress-mode all | All |
| atu-egress-mode no-unknown-unicast | No unknown unicast |
| atu-egress-mode no-unknown-multicast | No unknown multicast |
| atu-egress-mode no-unknown-DA | No unknown destination address |
| atu-enable-learning | Enable learning |
| atu-enable-using-da | Enable using destination address |
| do | Do command from privileged mode (commands from privileged) |
| dot1x-auth ▾ | Authenticator |
| dot1x-auth force-auth | Port control: force authorized |
| dot1x-auth force-auto | Port control: auto |
| dot1x-auth force-unauth | Port control: force unauthorized |
| dot1x-auth reauth-enable | Enable re-auth |
| dot1x-auth reauth-disable | Disable re-auth |
| dot1x-auth keytx-enable | Enable KeyTx |
| dot1x-auth keytx-disable | Disable KeyTx |
| dot1x-auth quiet-period | Set Quiet period |
| dot1x-auth tx-period | Set Tx period |
| dot1x-auth reauth-period | Set Re-auth period |
| dot1x-auth supp-timeout | Set Supp timeout |
| dot1x-auth server-timeout | Set Server timeout |
| dot1x-auth max-request | Set max. request |
| dot1x-supp ▾ | Supplicant |
| dot1x-supp force-auth | Port control: force authorized |
| dot1x-supp force-auto | Port control: auto |
| dot1x-supp force-unauth | Port control: force unauthorized |
| dot1x-supp admin-valid | Set admin port valid |
| dot1x-supp admin-invalid | Set admin port invalid |
| dot1x-supp identity | Set identity name |
| dot1x-supp password ▾ | Set password value |
| dot1x-supp password code | Set password as CODE |
| dot1x-supp password base32 | Set password as Base32 |
| dot1x-supp password none | Remove password |
| dot1x-supp held-period | Set Held period |
| dot1x-supp auth-period | Set Auth period |
| dot1x-supp start-period | Set Start period |
| dot1x-supp max-start | Set Max start |
| end | Return to the previous level → CONFIGURATION |
| exit | Return to the previous level → CONFIGURATION |
| force-10-full | Force ethernet speed 10Mbps full-duplex |
| force-10-half | Force ethernet speed 10Mbps half-duplex |
| force-100-full | Force ethernet speed 100Mbps full-duplex |
| force-100-half | Force ethernet speed 100Mbps half-duplex |
| force-1000-full | Force ethernet speed 1000Mbps full-duplex |
| jumbo ▾ | Set jumbo packet size |
| jumbo 1522B | Set jumbo packet size 1522B |
| jumbo 2048B | Set jumbo packet size 2048B |
| jumbo 10240B | Set jumbo packet size 10240B |
| lacp-actor-prio | Set LACP actor port priority [default: 128] |
| lacp-actor-mode-active | LACP actor active mode [default: default] |
| lacp-actor-mode-passive | LACP actor passive mode |
| lacp-actor-shorttimeout-on | Enable LACP actor short timeout |
| lacp-actor-shorttimeout-off | Disable LACP actor short timeout [default: default] |
| lacp-actor-aggregation-on | Enable LACP actor aggregation [default: default] |
| lacp-actor-aggregation-off | Disable LACP actor aggregation |
| lacp-lag | Set port to given LAG |
| lacp-partner-key | Set LACP partner administrative key [default: 0] |
| lacp-partner-port | Set LACP partner administrative port number [default: 0] |
| lacp-partner-prio | Set LACP partner administrative port priority [default: 0] |
| lacp-partner-sys-id | Set LACP partner administrative system ID [default: 00:00:00:00:00:00] |
| lacp-partner-sys-prio | Set LACP partner administrative system priority [default: 0] |
| mdix ▾ | Set Media Dependent Interface Crossover |
| mdix force-mdi | Force MDI mode |
| mdix force-mdix | Force MDIX mode |
| mdix auto | Auto mode for MDI/MDIX |
| mirror ▾ | Setting source ports for mirroring |
| mirror ingress-src | Selects port ingress data as mirroring source |
| mirror egress-src | Selects port egress data as mirroring source |
| mirror no-ingress-src | Disables port ingress data as a mirroring source |
| mirror no-egress-src | Disables port egress data as a mirroring source |
| no-lacp-lag | Remove port from LAG [default: default] |
| pae-mode-auth | Set authenticator mode |
| pae-mode-none | Set none PAE mode |
| pae-mode-supp | Set supplicant mode |
| poe-disable | Disable PoE |
| poe-donot-ignore-discovery | Do not ignore discovery |
| poe-enable | Enable Power over Ethernet |
| poe-ignore-discovery | Ignore PoE discovery |
| poe-no-swap-pairs | Do not swap PSE pri/sec pairs |
| poe-no-power-limit | No power limit |
| poe-power-limit | Set PoE power limit (mW) |
| poe-swap-pairs | Swap PoE PSE pairs |
| port-vlan-default | Set default port-based VLAN |
| port-vlan-member | Configure port-based VLAN membership |
| port-vlan-no-member | Remove Port-based VLAN |
| power-down | Power down (shutdown) the port |
| power-up | Power up (negate the shutdown) the port |
| rate-in-limit | Limit input speed rate |
| rate-in-nolimit | Disable rate in speed limit |
| rate-in-speed | Set input speed rate in kbps |
| rate-out-limit | Limit output speed rate |
| rate-out-nolimit | Disable rate out speed limit |
| rate-out-speed | Set output speed rate in kbps |
| rstp-cost | Set RSTP-M admin cost |
| rstp-disable | Disable RSTP-M on port |
| rstp-edge | Enable RSTP-M admin edge |
| rstp-edge-none | No admin edge |
| rstp-enable | Enable RSTP-M on port |
| rstp-prio | Set RSTP-M port priority |
| vlan-keep-tag | Do not discard Tag |
| vlan-keep-untag | Do not discard Untag |
| vlan-keep-vid | Do not force VLAN VID |
| vlan-none | Disable VLAN MODE |
| vlan-default-id | Set default VLAN ID |
| vlan-discard-tag | Discard tagged VLAN frames |
| vlan-discard-untag | Discard untagged VLAN frames |
| vlan-force-vid | Force VLAN ID |
| vlan-mode ▾ | Set VLAN mode |
| vlan-mode fallback | Enable fallback mode |
| vlan-mode check | Enable check mode |
| vlan-mode secure | Enable secure mode |
| vlan-pri-initial ▾ | Set ports initial priority mode |
| vlan-pri-initial override | Use only ports default priority value |
| vlan-pri-initial tag-only | Use priority from tag |
| vlan-pri-initial ip-only | Use priority from IP header |
| vlan-pri-initial iptag-comb | Use priority from IP header or tag |
| vlan-pri-initial iptag-tag | Use priority from tag or IP header |
| vlan-pri-value | Set ports default priority value |
RING MODE
Parent mode: CONFIGURATION
| Command | Description |
|---|---|
| end | Return to the previous level → CONFIGURATION |
| exit | Return to the previous level → CONFIGURATION |
| do | Do command from privileged mode (commands from privileged) |
| enable | Enable METEL LAN-RING |
| disable | Disable METEL LAN-RING |
| rid | Set METEL LAN-RING identificator |
| master | Set METEL LAN-RING Master (only v1) |
| slave | Set METEL LAN-RING Slave (only v1) |
| atu-clear-enable | Enable ATU clear (only v2) |
| atu-clear-disable | Disable ATU clear (only v2) |
| version ▾ | Set METEL LAN-RING version |
| version v1 | METEL LAN-RING version 1 |
| version v2 | METEL LAN-RING version 2 |
LINE MODE
Parent mode: CONFIGURATION
| Command | Description |
|---|---|
| authentication ▾ | Authentication configurations parameters |
| authentication method1 ▾ | First authentication method |
| authentication method1 deny | No authentication |
| authentication method1 permit | Permit authentication |
| authentication method1 local | Local authentication |
| authentication method1 tacacs | TACACS+ authentication |
| authentication method2 ▾ | Second authentication method |
| authentication method2 deny | No authentication |
| authentication method2 permit | Permit authentication |
| authentication method2 local | Local authentication |
| authentication method2 tacacs | TACACS+ authentication |
| authentication method3 ▾ | Third authentication method |
| authentication method3 deny | No authentication |
| authentication method3 permit | Permit authentication |
| authentication method3 local | Local authentication |
| authentication method3 tacacs | TACACS+ authentication |
| banner | Specify terminal |
| disable | Disable terminal |
| do | Do command from privileged mode (commands from privileged) |
| enable | Enable terminal |
| end | Return to the previous level → CONFIGURATION |
| exit | Return to the previous level → CONFIGURATION |
| timeout | Set activity timeout in seconds (0 = disabled) [default: 3600] |
INPUT MODE
Parent mode: CONFIGURATION
| Command | Description |
|---|---|
| end | Return to the previous level → CONFIGURATION |
| exit | Return to the previous level → CONFIGURATION |
| do | Do command from privileged mode (commands from privileged) |
| label | Set digital input label |
| negation-enable | Enable negation of digitial input |
| negation-disable | Disable negation of digitial input |
| min-duration | Set Minimal pulse duration in miliseconds with step 10ms |
VLAN MODE
Parent mode: CONFIGURATION
| Command | Description |
|---|---|
| do | Do command from privileged mode (commands from privileged) |
| end | Exit VLAN configuration → CONFIGURATION |
| exit | Exit VLAN configuration → CONFIGURATION |
| member-none | Remove VLAN membership |
| member-tagged | Tag VLAN membership |
| member-unmodified | Set VLAN membership to unmodified |
| member-untagged | Untag VLAN membership |
| priority-override ▾ | Override VLAN priority |
| priority-override 0 | Override priority with number 0 |
| priority-override 1 | Override priority with number 1 |
| priority-override 2 | Override priority with number 2 |
| priority-override 3 | Override priority with number 3 |
| priority-override 4 | Override priority with number 4 |
| priority-override 5 | Override priority with number 5 |
| priority-override 6 | Override priority with number 6 |
| priority-override 7 | Override priority with number 7 |
| priority-override disable | Disable priority override |
| remove | Remove VLAN |
| disable | Disable VLAN |
| enable | Enable VLAN |
LAG MODE
Parent mode: CONFIGURATION
| Command | Description |
|---|---|
| actor-key | Set LAG actor key [default: 100-800] |
| actor-sys-id | Set LAG actor system ID [default: own MAC address] |
| actor-sys-prio | Set LAG actor system priority [default: 32768] |
| disable | Disable LAG |
| do | Do command from privileged mode (commands from privileged) |
| enable | Enable LAG [default: default] |
| end | Exit LAG configuration → CONFIGURATION |
| exit | Exit LAG configuration → CONFIGURATION |
| maximum-links | Maximum number of simultaneously active ports [default: 8] |